Ultimate Game Tech
Knowledgebase
Ultimate Game Tech > Ultimate Game Tech Helpdesk > Knowledgebase

Search help:


Firmware Update Issues

Solution

 

In case of a Firmware update interruption due to power failure/PC crash use the following method to update your device firmware

Connect Device to PC. Device will have booted into firmware update mode with flashing red lights

Go to Help-> Firmware Recovery

Click ok

IF you have existing firmware you can retry the update, if not click NO to run manually and select firmware file (contact us if you need a firmware file)  

Click “Open Firmware File” and browse to the location of the downloaded firmware

Click “Program  UGT LCD”

Wait for the firmware update to complete with the message “UGT LCD Firmware update complete successfully”Click “Reset UGT LCD and Close Updater”.  The device should boot up as normal.

 
Was this article helpful? yes / no
Article details
Article ID: 1
Category: Knowledgebase
Rating (Votes): Article rated 3.0/5.0 (2)

 
« Go back

 
Powered by Help Desk Software HESK, in partnership with SysAid Technologies